The Universal Selection Source: Cosmetics Ingredients

Online Course

Formulating Reactive Hot Melt Adhesives

This is a Past Course

Recorded on Nov 22, 2016

Formulate easily reactive hot melts to meet high performance applications requirements. Know about state-of-the-art processing techniques specific to reactive hot melts to achieve desired properties.

Edward will review the choice of ingredients & their impact on final performance / crosslinking speed and attention points (packaging, shelf & pot life...) specific to 1K reactive system vs. traditional hot melts.

Read the full Course Outline

Presented By:
Edward M. Petrie
Length: 90 min

Course Type: Formulation
Level: Intermediate

Add Recorded Course to your Cart

Package includes:

.wmv Courses Recording, Presentation Slides & Transcript of Q&A session

Why should you view this course?

There is an increasing interest from the adhesive & sealant industry to develop reactive hot melts for high performance applications (transport, building & construction, packaging, electrical & electronics...). Understanding how to combine the advantages of hot melts (fast set, 1K) with the advantages of thermoset technology (creep, heat resistance) is the key! Join this course and:

  • Get a fresh eye on current & developing reactive hot melt technologies to formulate for high performance applications
  • Understand how to choose the right ingredients by knowing their impact on final performance, crosslinking speed/ crosslinking rate
  • Know about the key attention points specific to packaging & increasing shelf life & pot life for reactive hot melts compared to standard hot melts

Who should view this course?

Hot Melt Adhesives & Sealants formulators who wants to formulate for high performance markets include transportation, building and construction, packaging, and electrical and electronic.

Course Outline

  • Introduction

  • Value Proposition of Reactive Hot Melt Adhesives and Sealants

  • Possible Polymeric Types and Reaction Mechanisms
    1. Polyurethanes
    2. Polyolefins
    3. Styrene Butadiene Copolymers
    4. Other Polymers

  • Processing to Consider for Reactive Hotl Melts (Packaging, Shelf and Pot Life, Ambient Conditions...)

  • Reactive Hot Melts Trends and New Opportunities

Currency Converter Add To Cart

Courses You May Also Like :

Sealants: Formulation Strategies for Latest Performance Challenges Sealants: Formulation Strategies for Latest Performance Challenges
Hot Melts Optimization for Quality at Lower Costs Hot Melts Optimization for Quality at Lower Costs
Optimizing Hot Melt Open Time vs. Setting Speed with Efficient Wax Selection Optimizing Hot Melt Open Time vs. Setting Speed with Efficient Wax Selection
Flexible Packaging Adhesives: Hands-on Formulation Guide for Today’s Needs Flexible Packaging Adhesives: Hands-on Formulation Guide for Today’s Needs
Maximizing Adhesion in Adhesives & Coatings - Formulations & Processes Maximizing Adhesion in Adhesives & Coatings - Formulations & Processes
Water-based Adhesives: Achieving High Performance with Rheology Modifiers Water-based Adhesives: Achieving High Performance with Rheology Modifiers
Selecting Plasticizers for Adhesives and Sealants Formulation Selecting Plasticizers for Adhesives and Sealants Formulation
Maximizing Moisture Resistance in Structural Epoxy and Polyurethane Adhesives Maximizing Moisture Resistance in Structural Epoxy and Polyurethane Adhesives
Heat and Cold Seal Adhesive Coatings for Packaging Heat and Cold Seal Adhesive Coatings for Packaging
Selecting Tackifiers and Plasticizers for PSA Formulations Selecting Tackifiers and Plasticizers for PSA Formulations
Adhesion Promoters and Primers for Adhesives & Coatings Adhesion Promoters and Primers for Adhesives & Coatings
Electrically and Thermally Conductive Adhesives Formulation Strategies Electrically and Thermally Conductive Adhesives Formulation Strategies
PSA Formulation Strategies for Tapes & Labels PSA Formulation Strategies for Tapes & Labels
Biocides in Waterborne Adhesives: How to Select in Today's Regulatory Environment? Biocides in Waterborne Adhesives: How to Select in Today's Regulatory Environment?
Drying Optimization Strategies for Waterbased Systems Drying Optimization Strategies for Waterbased Systems
Damping Noise & Vibration: Strategies for Today & Tomorrow Damping Noise & Vibration: Strategies for Today & Tomorrow
Bonding Dissimilar Materials: How to Reduce Internal Stress Levels Bonding Dissimilar Materials: How to Reduce Internal Stress Levels
PSA Testing: Standard Tests When There Is No Standard PSA Testing: Standard Tests When There Is No Standard
Structural Epoxy Adhesives Formulation Optimization Part 2 Structural Epoxy Adhesives Formulation Optimization Part 2

Your cart

The shopping cart is empty.

Back to Top