OK
The Universal Selection Source:
Cosmetics Ingredients

Mark DeMeuse

Independent Consultant, MTD Polymer Consulting, United States

Bio

Dr. Mark T. DeMeuse is an internationally recognized expert in the area of structure-property-processing relationships for materials. He received his PhD from Illinois Institute of Technology and then, did postdoctoral studies with a joint appointment between University of Massachusetts, Amherst and Celanese Corporation.

Throughout his career, he has held positions of increasing importance in both technical and management areas at EniChem America, Applied Extrusion Technologies and Celgard. Presently, Dr. DeMeuse runs his own consulting firm in Charlotte, NC specializing in high temperature polymers, composites ...

Read more

Dr. Mark T. DeMeuse is an internationally recognized expert in the area of structure-property-processing relationships for materials. He received his PhD from Illinois Institute of Technology and then, did postdoctoral studies with a joint appointment between University of Massachusetts, Amherst and Celanese Corporation.

Throughout his career, he has held positions of increasing importance in both technical and management areas at EniChem America, Applied Extrusion Technologies and Celgard. Presently, Dr. DeMeuse runs his own consulting firm in Charlotte, NC specializing in high temperature polymers, composites and porous materials for use as battery separators and filtration membranes. He has published over 50 papers in various areas of polymer research and is the inventor of 35 patents.

Read less
A Word from Mark DeMeuse :
Science is a series of experiences for which the results are often completely unknown

Fields of Expertise

Thermoplastic Composites
36
High Heat Plastics
26
Polymer Processing
22
Plastic Formulation
16
Polymer Reinforcement
12
Nanocomposites
11
Automotive/ Transportation
10
Show all the fields of expertise
Carbon Fibers
10
Surface Modification
10
Carbon Nanotubes (CNT)
10
Material Testing
10
Curing Agents / Hardeners
10
Recycling
9
Glass Fibers
8
Electrical & Electronics
6
Metal Replacement
6
Barrier Performance
6
Flame Retardants
5
Antioxidants
5
Processing Aids
5
LCP (Liquid Crystal Polymer)
4
Lithium-Ion Batteries
4
Thermoplastics
4
PEEK (Polyether Ether Ketone)
4
Medical Plastics
4
Biocides / Antimicrobial Agents
4
Weight Reduction
4
PI (Polyimide)
2
PBI (Polybenzimidazole)
2
Electrical Discharge
2
Healthcare / Medical
2
Epoxy
2
Thermal Resistance
2
Weight Reduction / Lightweighting
2
Packaging
2
Food Packaging
2
Conductive Fibers
2
Wettability
2
DMA (Dynamic Mechanical Analysis)
2
Thermal Insulation
2
PEI (Polyetherimide)
2
Impact Resistance
2
PP (Polypropylene)
2
Heat Stabilizers
2
PPS (Polyphenylene Sulfide)
2
Boron Nitrides
2
Conductive Fillers
2
Engineering Plastics
2
Electrical Conductivity
2
Nanoparticles
2
Impact Modifiers
2
Opacifiers
2
Titanium Dioxides
2
Inorganic Pigments
2
Coupling Agents / Compatibilizers
2
Reinforcers
2
Hide part of fields of expertise
Reputation Score
Le score de réputation est déterminé en fonction des critères suivants :
  • le nombre de publications
  • la qualité des publications (notation par la communauté)
  • le nombre de followers
  • le nombre de vue et de partage des publications.
Les meilleurs contributeurs obtiennent des badges. Il existe 4 niveaux :
Top
Pour les contributeurs ayant un score très élevé
(au dessus de xxxx)
Rising Star
Pour les contributeurs ayantun score élevé
(entre xxxx et xxxx)
Confirmed
Pour les contributeurs ayant un bon score
(entre xxx et xxxx)
New
Pour les contributeurs ayant un score peu élevé
(entre 0 et xxx)

Works

Books

  • High Temperature Polymer Blends, Woodhead Publishing (2014)
  • Comparison of Microwave and Thermal Cure of Epoxy Resins, J. Wei., M.C. Hawley, J.D. DeLong and M. DeMeuse, Polym. Eng. Sci., 33(17): 1132-1140, Sept. 1993
  • Properties of Blends Containing Two Liquid Crystalline Polymers, S. Kenig, M.T. DeMeuse and M. Jaffe, Polym. Adv. Tech., 2(1), 25-30, Feb. 1991
  • Biaxial Stretching of Film: Principles and Applications, Woodhead Publishing (2011)

Patents

  • Polypropylene Blends and Films Prepared Therewith, U.S. Patent 6,268,062 (2001)
  • High OTR Polylolefin Films, U.S. Patent 6,485,817 (2002)
  • Biaxially Oriented Film Prepared from Metallccene Carlyzed Polypropylene, U.S. Patent 6,165,599 (2000)
Back to Top